STARPLUS Triad 1 Product Description Manual page 253

Volume Control
If the FLASH or HOLD button is pressed during the recording, the recording is terminated.
If a station user presses the record button while in a two-party conference, it is recorded.
If the button is pressed a second time, the conference ends and the call is returned to a
two-way conversation.
Only one active recording per station is allowed.
If a conference is being recorded and the conference master exits, the recording stays
active. The recording stops if the initiator re-enters the conference and ends it, removes
the record function, or the conference ends on its own.
Only the initiator of a conference can invoke/remove the record function during a
conference.
A conference warning tone is not given to conference members, if the initiator is
recording the conference and record tone is disabled.
Recording is not allowed for a station that is barged in, Executive Overridden, or on an
active OHVO call.
An Unsupervised Conference Call can be recorded.
Volume Control
There is a volume control bar below the keypad to control the ringing, handset, and
speakerphone volumes.
Display Messages
While using these function/features, Digital Key Telephones display the following messages:
Listening to Background Music ...
Using the speakerphone on a Intercom call ...
Using the handset on a Intercom call ...
Using the speakerphone on a CO call ...
SP EA K E R B G M
M M M D D Y Y
SP EA K E R CA LL
M M M D D Y Y
H A ND SET I C M
M M M D D Y Y
SP EA K E R CA LL
M M M D D Y Y
Chapter 6 - Digital Station Operation
[#########]
H H :M M a m
[#########]
H H :M M a m
[#########]
H H :M M a m
[#########]
H H :M M a m
6-75