Table of Contents
Advertisement
Last Number Redial (LNR)
Last Number Redial (LNR)
1. Press the SPEED button.
2. Press [#]. The last number dialed over an outside line is automatically redialed.
LCD Display - Contrast
There are four contrast adjustments available to the user to adjust the LCD for different
lighting levels.
At idle phone:
Press volume bar up or down for desired effect.
Conditions
BGM must be inactive.
Handset must be in cradle.
ON/OFF button must be set to OFF.
Least Cost Routing (LCR)
Placing an Outside Call when LCR is Enabled
1. Dial [9] on the dial pad,
-or-
Press preprogrammed LCR button.
2. Dial the desired telephone number.
3. Wait for an answer. Lift handset or use the speakerphone to converse.
If all available lines are busy, remain off-hook for four seconds to automatically be queued
onto LCR for an available line, then hang up.
The system automatically selects the original line used to place the call and redials
the number.
If that line is busy, the system automatically selects another line from the same group
and redials the number.
If no lines are available in the same group, the station receives busy tone and can
queue for a line.
If the station user preselects a line before activating LNR, the preselection overrides
the line that was used originally.
Chapter 6 - Digital Station Operation
6-49
Advertisement
Chapters
Table of Contents
