Table of Contents
Advertisement
7-14
Chapter 7 - Single Line Telephone Operation
Intercom Calling
Placing an Intercom Call
1. Lift the handset.
2. Dial the intercom number. You will hear ringing if the station is in the "T" answering mode
or two bursts of tone if the called station is in the "H" or "P" positions.
3. Replace the handset to end the call.
Answering an Intercom Call
Lift handset to converse,
-or-
If your SLT is equipped with a speakerphone, press the Speaker button to converse in a
handsfree mode.
Conditions
Off-Hook Preference may affect this feature. (Refer to
information.)
Least Cost Routing (LCR)
Placing an Outside Call (when LCR enabled)
1. Lift the handset.
2. Dial [9] on the dial pad.
3. Dial the desired telephone number.
4. Wait for an answer, then converse.
If all lines available are busy, remain off-hook for four seconds to automatically be queued
onto LCR for an available line.
If an LCR Queue Call Back is activated:
Answer call when telephone is signaled, the desired telephone number is automatically
redialed.
Cancelling an LCR Queue Call Back
1. Dial the LCR Queue Cancel code [626] on the dial pad.
2. Replace the handset.
Only one LCR Queue Call Back request may be initiated by a station. When a second
request is made, the first request is cancelled.
If the 911 feature is enabled, the LCR access code is 800 instead of 9.
Intercom Calling
"Off-Hook Preference"
for more
Advertisement
Chapters
Table of Contents
