Direct Inward System Access (Disa); Do Not Disturb (Dnd); One-Time Do Not Disturb - STARPLUS Triad 1 Product Description Manual

Direct Inward System Access (DISA)

4. Hang up to complete the transfer.
Direct Inward System Access (DISA)
1. Call the phone number the system administrator specified as the DISA line. The system
answers and returns intercom dial tone.
2. Enter the DISA access code also specified by the system administrator, if applicable. Dial
tone is returned.
Placing an Outgoing Call
1. Dial a group access code: 9, 81–87. CO Dial tone is returned.
2. Dial the desired telephone number.
Reaching an Internal Station
1. Dial the three-digit station number. A ringback tone sounds.
2. Converse when party answers.
(Refer to System Timers in chapter 2 of the System Programming Manual.)

Do Not Disturb (DND)

Activating Do Not Disturb
Press the DND button. DND button lights steady. The DND button can be pressed while the
phone is ringing to stop the ringing. (Refer to One-Time Do Not Disturb.)
Removing Do Not Disturb
Press the DND button. The button LED extinguishes and DND is canceled.

One-Time Do Not Disturb

Allows you to prevent calls from ringing at your station while you're on a call. The One-Time
DND condition automatically cancels when you end your call.
Press the DND button while you're off-hook and connected to a CO line or intercom call. The
DND button LED lights and off-hook tones at your station are cancelled.
Calls may only be transferred to internal stations only. An attempt to transfer a
call off-net (via a Speed dial bin) results in the call recalling upon going on-hook.
The conference timer monitors a DISA trunk-to-trunk call and release the lines
one (1) minute after the time expires.
If the station dialed is unattended, busy or in DND, intercom dial tone is returned
(after the Preset Call Forward Timer expires).
Chapter 5 - Electronic Telephone Operation
5-31