Co Line Queuing - STARPLUS Triad 1 Product Description Manual

CO Line Queuing

3. Lift handset to converse or use speakerphone.
CO Line Queuing
A station can queue only one line at a time. If you see that a particular outside line is busy and
you wish to be placed on a list waiting for that line to become available:
1. Press desired busy outside line button,
-or-
Press POOL button. (Busy tone sounds.)
2. Press preprogrammed LINE QUEUE button (621).
3. Replace handset or press ON/OFF button.
Answering a Queue
If you hear ringing and an outside line of the line group or a LOOP button you queued onto is
rapidly flashing:
1. Lift handset or press ON/OFF button.
2. Press flashing outside line button or Loop button to answer.
Conditions
A LOOP button or direct appearance of the queued line is required.
Conference Combinations
Only stations that have conference enabled can institute a conference.
Add-On Conference -- Up to eight internal parties can engage in a conference, or seven
internal parties with one external party.
Multi-Line Conference -- One internal station can engage in a conference with up to four
outside parties.
Capacities
The total number of conferences that can be conducted simultaneously system-wide
depends upon several factors. The following table shows the system capacity for conferences
using specific amounts of parties per conference. Multiple conference capacity
configurations are possible. For example, you could have one 8-party conference and five
3-party conferences simultaneously.
Parties per Maximum
Conference Conferences
3 or 4 10
5 5
6 3
7 or 8 2
Chapter 6 - Digital Station Operation
6-33