8-12
Chapter 8 - Digital Attendant Operations
Mapping Options
Description
The DSS/BLF Console unit can access Stations, Direct Appearing CO Lines, or features that
may be assigned to any of the flexible buttons. A DSS/BLF unit may be assigned to one of the
different MAP configurations available.
Any one of the five MAP configurations may be assigned to the DSS/BLF and any number of
maps may be assigned to one station. However, MAPs that have buttons assigned as CO lines
cannot be changed, buttons assigned as Stations can be changed by the user.
There are five pre-defined MAPs for the DSS/BLF console with default button programming.
Refer to
MAP #1 -- By default has the first 12 CO Lines and the first 36 Stations, 100-135. This provides
a default layout of a 12 X 36 configuration.
Figure 8-3 on page 8-12
Figure 8-3: DSS Console Map #1
through
Figure 8-7 on page
DSS/BLF Console with Map
8-16.