STARPLUS Triad 1 Product Description Manual page 281

Attendant Directory List Programming and Operation
The first entry (000) in the Directory List is shown on the display.
The following procedure is used to enter, edit, and erase names in the Directory List for
stations or speed dial numbers.
1. Enter desired 3-digit Directory List number (000-199), or dial [
or [#] to scroll down (previous entry) through the list.
If just changing a name associated with an existing station, skip to step 4.
2. Press TRANS.
3. Enter the 3- or 4-digit station intercom number.
4. Press MUTE.
5. Enter the name (up to 24 characters may be entered) by using the keys. The display
updates as the name is entered.
6. Press SPEED when finished. Confirmation tone sounds and the display shows the new or
changed name.
D I R LS T A A A B I N/ IC M : XX X X
n nn nn nn nn n nn nn nn nn nn nn n
AAA = Directory List entry number (000-199)
XXXX = Either:,
A 3- or 4-digit station number (100-8999)
-or-
A 3-digit local number/name translation table number
(600-799 minus assigned station numbers that would
overlap)
-or-
A 4-digit remote device number (1000-8999 minus
assigned station numbers that would overlap)
-or-
A 4-digit station speed bin number (9020-9999)
nnn = Programmed Name (blank if none)
1 = 1#
2 = 2#
3 = 3#
4 = 4#
5 = 5#
6 = 6#
7 = 7#
Figure 8-2: Directory List Keypad Map
Chapter 8 - Digital Attendant Operations
Other Codes
8 = 8# " = 01 * = *#
9 = 9# , = 02 ( = #1
0 = 0# ? = 03 ) = #2
Space = 11 / = 04 + = #3
: = 12 ! = *1 = = #4
- = 13 $ = *2 # = ##
' = 14 & = *4 . = 24
] to scroll up (next entry)
.
8-7