Off-Hook Preference; Off-Hook Preference Programming; Programming Pbx/Centrex Codes Onto Flex Button - STARPLUS Triad 1 Product Description Manual

5-44
Chapter 5 - Electronic Telephone Operation

Off-Hook Preference

To access an outside line or a feature:
Go off-hook or press the ON/OFF button.
To access internal intercom dial tone, while Off-Hook Preference enabled:
Press preprogrammed ICM button or dial your own intercom number. (Do not lift handset
or press ON/OFF button before dialing intercom number.) LED lights steady and intercom
dial tone sounds. You may now dial an internal station or feature Access Code.

Off-Hook Preference Programming

If your phone is programmed for Off-Hook Preference and has been given the ability to
enable or change the prime flex button.
1. Dial [691] on the dial pad.
2. Dial the desired button number. Refer to the following chart:
Disabling Off-Hook Preference
1. Dial [691] on the dial pad.
2. Dial [00] on the dial pad.

Programming PBX/Centrex Codes Onto Flex Button

For easy one-button access to Centrex or PBX features, perform the following steps:
1. Program the Centrex or PBX code into a station or system speed dial bin, including
hook-flash (flash key), [
programming.
2. Program that speed bin onto a flexible* button.
01 02
F F
05 06
F F
09 10
F F
13 14
F F
17 18
F F
21 22
F F
] , and [#] commands. Refer to station or system speed dial
.
03 04
F F
07 08
F F
11 12
F F
15 16
F F
19 20
F F
23 24
F F
Off-Hook Preference