Paging; Park - Personal - STARPLUS Triad 1 Product Description Manual

6-56
Chapter 6 - Digital Station Operation

Paging

If you were given the ability to make page announcements:
1. Lift handset or press ON/OFF button.
2. Press preprogrammed PAGE button,
-or-
Dial the paging code.
[700] = All Call - Internal and External
[701- 708] = Internal Zone 1-8
[709] = Internal All Calls
[760] = External All Calls (All Ext Zones)
[761] or [762] = External Zones (1-2)
3. Stations receiving a Page Announcement can press the Volume Bar to change the paging
volume. The following message displays:

Park - Personal

Each station in the system can place a call to a personal park location and later retrieve that
call from the originating station.
While connected to an outside line:
1. Press the TRANS button. The caller is put on Exclusive Hold.
2. Dial the Personal Park location [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button. Dial tone sounds.
SP EA K E R PAG E
M M M D D Y Y
Stations off-hook or in DND do not hear internal page announcements.
When making a zone page or All Call page and the zone is busy, the page initiator
receives ring back tone until the zone becomes available. You then hear a warning
tone and can make the page announcement.
External paging requires optional hardware.
When dialing the personal park location and it is already occupied, the initiating
station receives the previously parked call and the second call is parked.
[#########]
H H :M M a m
Paging