Executive Override - STARPLUS Triad 1 Product Description Manual

Executive Override

Executive Override
The Executive Override feature enables Executive designated stations the ability to override
and barge-in on other keysets engaged in conversation. The programming code is [625].
If you call a busy station:
1. Press the preprogrammed EXECUTIVE OVERRIDE button.
Executive station is bridged onto the CO line conversation in progress at the called
station. Optional warning tone sounds and presented to all parties prior to cut-through.
2. Replace handset at Executive station to terminate the override.
Conditions
An error tone occurs:
- If the called party is in a conference.
- If the called party is already on an OHVO call.
- If the called party has a Camp On at their station.
If the Executive joins a call and one of the members does a hook-flash or presses their
transfer button, the Executive is dropped.
If the Executive does a hook-flash or presses their transfer button, it is ignored.
When the Executive joins an intercom call or CO call and the Executive is not in a mute
state, and any member of the party hangs up, the call is converted to a two-party
conversation.
When the Executive joins an intercom call or CO call and the Executive is in the mute
state, and either of the two parties in the intercom call hang up, the call is dropped. If the
Executive hangs up, the call remains a two-party conversation.
Certain forwarding types affect override operation.
Intercom button disallows Executive Override..
Use of this feature when the Executive Override warning tone is disabled may
be interpreted as a violation of federal, state or local laws, and an invasion of
privacy. Check applicable laws in your area before intruding on calls using this
feature.
A change in volume may occur on the CO line or intercom call after the barge-in
occurs.
Chapter 6 - Digital Station Operation
6-39