Introduction - STARPLUS Triad 1 Product Description Manual

Introduction

Introduction
The STARPLUS
allowing each telephone user to program their telephone to meet their own individual
needs. Each Electronic key telephone provides the following keys, indicators and features:
Handset and Speaker are located at the left side of the front panel. A handset is provided to
allow confidential conversation when desired. Lifting the handset from its cradle (going
off-hook) disengages the station's built-in speaker. The speaker is located directly below the
center portion of the handset. The station may be operated with the handset on-hook. When
this occurs, audio is transmitted to the station user through the station's speaker.
Flexible Feature Buttons are used to access idle outside lines, provide DSS/BLF for internal
stations, access speed dial number and activate features. These buttons are programmed by
the individual station user. The default flex feature buttons are described as follows:
MUTE button allows you to switch the built-in microphone on or off when using the
speakerphone, or the handset microphone when using the handset.
CAMP ON button allows you to alert a busy party that an outside line is on hold and
waiting for them.
CALL BACK button allows you to initiate a call back request to another busy station. As
soon as that station becomes idle, the station that left the call back request is
automatically signalled. This feature is NOT available on the
Telephone.
DO NOT DISTURB (DND) button allows the user to place their telephone into a Do Not
Disturb mode to eliminate incoming outside line ringing, intercom calls, transfers and
paging announcements. The station in DND can use the telephone to make normal
outgoing calls. On Attendant stations, this button becomes the system Night Mode
button.
PICK UP button allows you to pickup a tone ringing intercom call, transferred, incoming,
or recalling outside line call to a specific unattended station either by group or directed
call pickup.
LINE QUEUE button allows you to queue onto an outside line when all lines in a group are
busy. Your station is placed in queue awaiting a line in the same group to become
available.
Fixed Feature Buttons function as follows:
SPD button provides you with access to speed dialing, save number redial and last
number redial. This button is also used to access speed dial and flex button
programming.
FLASH button is used to terminate an outside call and restore dial tone without having to
hang up the handset. It is also used to transfer calls behind a PBX or Centrex within those
systems.
HOLD button enables you to place an outside caller on hold.
ON/OFF button enables you to make a telephone call without lifting the handset. It turns
the telephone on and off when using the speakerphone.
Triad 1/2/3 Systems have a wide variety of features and flexible programming,
Chapter 5 - Electronic Telephone Operation
STARPLUS Basic Key
5-3