Default Numbering Plan - STARPLUS Triad 1 Product Description Manual

Default Numbering Plan

Default Numbering Plan
Refer to
Dial By Name
The system lets station users dial extension numbers by entering the name of a person
programmed for that station. The system database allows entry of a name (alphanumeric) up
to 24 characters for each station. This programmed name can be used for dialing-by-name
station users and displays on LCD displays.
1. Dial the Dial-By-Name code [6
-or-
Press the preprogrammed DIAL-BY-NAME flex button.
2. Dial person's last name on the keypad as shown:
EXAMPLE -- To search for the name BROWN, press [2][7][6][9][6].
Conditions
The system dials the station that matches the dialed name when a unique match is found.
If multiple names are located (found) after eight digits, the first one is dialed.
Names are entered as part of the system attributes database. Numbers may be entered as
part of a name. To avoid conflicts, all names must have a unique numerical sequence.
Appendix D, "Default Numbering Plan."
1
G-4
H-4
I-4
P-7
R-7
S-7
Q-7
*
Figure 6-3: Key Pad - Dial By Name
When the system finds a unique numeric match to the name being dialed, the call is
placed to the station matching the name.
The intercom call signals the station according to the H-T-P button.
If fewer than 8 digits are dialed, the numeric match is dialed after a 10 second
interdigit time-out occurs, or if [#] is pressed.
] on the dial pad,
.
A-2 D-3
B-2 E-3
C-2
F-3
J-5 M-6
K-5
N-6
L-5
O-6
W-9
T-8
X-9
U-8
Y-9
V-8
Z-9
OPER
#
0
Chapter 6 - Digital Station Operation
6-35