STARPLUS Triad 1 Product Description Manual page 283

Attendant Directory List Programming and Operation
To view the directory list:
1. Dial the Directory List dial code [680] on the dial pad,
-or-
Press the flexible button programmed as a directory dialing button.
2. Press a button on the key pad, once, twice or three times, that represents the letter of the
alphabet to begin viewing the list of names (e.g., when 2 is first pressed, it produces
names starting with A. When 2 is pressed a second time, names that start with B display.
Pressing 2 a third time displays names that start with C). The alphabet is represented on
the key pad as shown below.
Names beginning with the letter chosen display on the LCD display.
3. Dial [
-or-
Dial [#] to scroll down (previous entry) through the list,
-or-
Press another key to view the list for a different letter of the alphabet.
4. When the desired name displays on the LCD, press the SPEED button to automatically dial
the destination station or outside phone number (via speed dial).
To transfer a call using directory dialing while on a call:
1. Press the TRANS button.
2. Dial the Directory Dial Code [680] on the dial pad,
-or-
Press the flexible button programmed for directory dialing.
3. Press the digit associated with the person's name and when it displays, press SPEED to
automatically dial the destination station.
1
G-4
H-4
I-4
P-7
R-7
S-7
Q-7
*
If there are no names in the Directory List beginning with the desired letter, a name
with the next higher letter displays on the LCD display.
] to scroll up (next entry) through the list,
.
Chapter 8 - Digital Attendant Operations
A-2 D-3
B-2 E-3
C-2 F-3
J-5 M-6
K-5 N-6
L-5 O-6
W-9
T-8
X-9
U-8
Y-9
V-8
Z-9
OPER
#
0
8-9