Station Relocation - STARPLUS Triad 1 Product Description Manual

Station Relocation

4. Dial the desired telephone number and include these special codes:
5. Press the SPEED button.
6. Replace the handset to end the speed bin programming.
Programming Multiple Speed Numbers
1. Press the SPEED button twice to conclude programming a number.
2. Enter the next speed number bin to program.
If the station has no line appearance for the line programmed into the speed bin, that line
comes up under the LOOP button or POOL button when accessed.
Erasing an Existing Speed Bin
1. Press the SPEED button twice.
2. Dial the speed bin location:
3. Press the SPEED button again. A confirmation tone sounds.
Station Relocation
The Station Relocation Feature lets a user unplug their station and plug it into another
location. Dialing a code followed by the old station number brings all the station attributes
including extension number, button mapping, speed dial, and class of service to the new
location.
1. A station can be relocated by unplugging it, then plugging it into a new location.
2. Dial [636] on the dial pad. Then, dial the extension number of the station being relocated.
Once this is done, all station attributes are copied to the current station.
Conditions
The station number that is dialed as the relocated station must be unplugged.
The relocated station is given the station attributes of the station doing the relocating.
The two stations trade station numbers and station attributes.
If a keyset is plugged into the relocated position it has all station attributes of the
relocating station. This feature is only applicable to keysets.
Digital stations must be relocated to another digital port. If a digital user moves their
station number to an analog port, the buttons are initialized and must be reprogrammed.
Station Lock disables this feature.
TRANS -- Initiates a Pulse-To-Tone switchover.
HOLD -- Inserts a Pause.
FLASH -- Inserts a Flash into the speed number.
TRANS -- When used as the first entry in the speed bin, this inserts a no-display
character causing numbers stored in the bin not to appear on the digital telephone's
display when bin is accessed.
If a station is assigned to a specific port and the user unplugs their station and
plugs it into another location, database administration programming is updated
to reflect the new port change.
Chapter 6 - Digital Station Operation
6-67