Single Line Audible Signals - STARPLUS Triad 1 Product Description Manual

10-36
Chapter 10 - Triad 1/2 System Configuration
Type of Signal
Incoming CO Line
Intercom Tone Ringing
Transferred CO Line
CO Line Recall
CO Queue Call Back
Intercom Ringback
Transferred CO Line
Call Announce
Busy Tone
Error Tone
Intercom Dial Tone
DND Tone
Paging Confirmation Tone
Conference Time-out Tone
Confirmation Tone
Table 10-11: Single Line Audible Signals
Frequency
Single Line Signals
20Hz 90 VAC 0.8 on/2.8 off; Repeated
20Hz 90 VAC 0.2 on/0.4 off/0.6 on/3.0 off; Repeated
20Hz 90 VAC 0.8 on/2.8 off; Repeated
20Hz 90 VAC 0.2 on/0.2 off/0.2 on/0.2 off
20Hz 90 VAC 1 Sec on/2 Sec off; Repeated
Single Line Confidence Tones
440+480 0.8 on/2.8 off; Repeated
440+480 0.8 on/2.8 off; Repeated
440 0.8 on/2.8 off; Repeated
480+620 0.5 on/0.5 off; Repeated
480+620 0.2 on/0.2 off; Repeated
350+440 Steady
350+440 0.4 on/0.4 off/0.2 on/0.2 off/0.2 on; Repeated
350+440 1 sec on
440 Programmable Steady Tone
350+440 0.8 on/0.8 off (3 bursts)
System Configuration Tables
Signal Duration