Table of Contents
Advertisement
3-8
Chapter 3 - Single Line Telephone Features
Custom
This feature allows the system administrator to enter up to ten custom messages for use by
system station users. These messages may be specified and customized by the customer on a
system-wide basis.
Name In Display
The Name in Display feature allows every extension (electronic/digital/SLT) the capability to
program the user's name for that station, so that people using display telephones see the
name instead of the station number on their display. The name is programmed at each
station by the user and may be up to seven letters in length.
Off-Hook Preference
SLTs may access a particular CO Line such as a private line or a line from a Group of CO lines
upon going off-hook. This is useful in Centrex or PBX applications when station users have
dedicated lines. Outside line dial tone is received just by going off-hook, without the need to
dial access codes.
Paging
Access Restriction
Programming on a per-station basis, can deny any station the ability to make any type of
page.
External
There are two external paging zone available on the
requires a three-digit dialing code. External paging requires an externally provided amplifier
and paging system. Each zone can have a relay contact associated to it.
Internal
There are eight internal paging zones available in the
any or all zones or in no zone at all. Stations not assigned to a page group can still make page
announcements, if allowed in station programming. Stations can be assigned to a page
group in order to receive pages but not allowed to make page announcements.
Personal Park
Single line telephones can be connected to two calls (Intercom or CO lines) at the same time
and toggle between the two calls. This can be performed with originated or received calls.
This feature is also used with the SLT multi-line conference feature.
Triad 1/2/3
System. External Paging
Triad 1/2/3
System. A station can be in
Name In Display
Advertisement
Chapters
Table of Contents
