STARPLUS Triad 1 Product Description Manual page 206

6-28
Chapter 6 - Digital Station Operation
2. If busy tone is received, press TRANS once to reconnect with the caller. Press TRANS again
and dial another park location or press another CALL PARK flexible button for a different
parking location.
Call Park Pickup - System
To retrieve a Parked Call:
1. Lift handset or press ON/OFF button.
2. Press the [#] button.
3. Dial parking location (430 to 437) where the call was parked or press the preprogrammed
CALL PARK flexible button for that park location.
Conditions
Intercom calls cannot be parked on system park locations (430-437); intercom calls can
be parked using the personal park location.
A CO call parked in a personal call park location recalls to the station that parked the call,
when the call park recall timer expires. The CO call rings to this station until the system
hold timer expires. The CO call then recalls the Attendant (both the Attendant and
initiating stations are ringing), and the Attendant recall timer is initiated. When the
Attendant recall timer expires, the CO call is disconnected.
Call Park - Personal
Each telephone in the system can place a call into a personal park location and then later
retrieve that call from the originating station. Intercom calls and CO line calls can be placed
into the stations' personal park location. Calls parked in a personal park location are subject
to the system call park recall timer. A station retrieving a personal parked CO call must have
either a direct CO line appearance or an available loop button to retrieve the parked call.
To park a call, while connected to an outside line:
1. Press the TRANS button. The caller is put on Exclusive Hold.
2. Dial the Personal Park location [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button.
Dial tone sounds.
To retrieve a parked call:
Dial the Personal Call Park location code [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button.
A talk path is established between the two parties.
Only one call can be parked in a Personal Call Park location at one time. When
dialing the Personal Park location and the location is already occupied, the
initiating station receives the previously parked call and the second call is then
parked.
Call Park