Common Procedures; Turn The Machine Off Before Beginning Any Procedure - Ricoh Pro C901S Replacement Manual

2. Common Procedures

2.1 Turn the Machine off Before Beginning Any
Procedure!
WARNING
• To prevent electrical shock, turn off the main power switch and
disconnect the ground wire from the machine and fixing heater.
Before performing any procedure shown in this manual, always do the following:
1. Press the operation switch to turn the machine off.
2. After turning off the operation switch, turn off the main power switch.
3. Wait a few seconds, and then disconnect the ground leakage circuit breaker
from the machine and fixing heater.
BZS007
The operation switch is on the control panel. (See p.12 "Control Panel".)
The main power switch is in the upper left corner behind the front left cover.
14