Cleaning The Media Sensors - Ricoh L5160 Cip Training

CIP Training L5160/L513
CIP Training C7200 series
Adjustment Settings for Operators Maintenance
1
4. Close the center cover.
• After cleaning, check that the pinch rollers are dry before setting media.

Cleaning the Media Sensors

Media sensors are located above the media feeding surface at the rear of the machine and on
the underside of the carriage. If dust builds up on the sensors on the underside of the carriage,
it may not be possible to correctly detect media. When dust builds up on the surface of the
sensors, remove the dust with a cotton swab.
Cleaning the media sensor on the underside of the carriage
When cleaning the media sensor on the underside of the carriage, see "Cleaning the Area
around the Print Heads".
• When cleaning the media sensor on the underside of the carriage, do not touch the
sensors with your hand. Touching the sensors may cause malfunctions.
• Do not touch the colorimetric sensor as cleaning may cause the sensor to become
misaligned.
1
0
1. Pinch roller
DWT316
1. Colorimetric sensor
2. Media sensor
3. Underside of the carriage
2 3
DWT313