Gear Assy Plate, Gear 9 - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.9.4 GEAR ASSY PLATE, GEAR 9

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the FUSER ASSY. (p.253)
4. Remove the COVER LEFT. (p.169)
5. Remove the GEAR ASSY HOUSING. (p.281)
6. Remove the four screws (silver, 6 mm) securing the GEAR ASSY PLATE.
7. Remove the GEAR ASSY PLATE, GEAR 9. (p.283)
8. Disengage the boss at the bottom of the connector of the HARNESS ASSY
FUSER from the frame.
9. Remove the GEAR 9 from the shaft on the frame.
One of the gears mounted on the GEAR ASSY PLATE may
C A U T I O N
come off as it is not secured. Be careful not to drop this gear.
The SPRING is located inside the unsecured gear of the GEAR
ASSY PLATE. Be careful not to drop this SPRING.
Disassembly and Assembly
8)
BOSS
BOSS
Figure 4- 91. GEAR ASSY PLATE, GEAR 9 Removal
Frame & Drive
Revision C
GEAR 9
9)
GEAR ASSY PLATE
6)
7)
GEAR
SPRING
JG3020EA
283
Confidential