Gear Assy Drive - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.67 Gear Assy Drive

4.2.67.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Cover Rear (Section 4.2.12).
4. Remove the Fuser Assy (Section 4.2.55).
5. Remove the Cover Assy I/F (Section 4.2.2).
6. Remove the Cover Left (Section 4.2.1).
7. Remove the Cover Assy Top (Section 4.2.7).
8. Remove the Cover Right (Section 4.2.9).
9. Remove the Chute MBF Assy (Section 4.2.30).
10. Remove the Shaft 14 (Section 4.2.51).
11. Remove the Gear 14 (Section 4.2.51).
12. Remove the P/H Assy (Section 4.2.42).
13. Remove the Chute Trans Assy (Section 4.2.54).
14. Remove the Plate Assy Left (Section 4.2.70).
15. Remove the CRU Top Guide Assy (Section 4.2.65).
16. Remove the Plate Handle (Section 4.2.72).
17. Remove the PWBA MCU (Section 4.2.83).
18. Remove the Motor Assy Main (Section 4.2.68).
19. Remove the PWBA PS (Section 4.2.85).
20. Remove the Paper Feeder (Section 4.2.29).
21. Remove the four screws securing the Gear Assy Drive to the printer.
22. Remove the Gear Assy Drive from the printer.
Disassembly and Assembly Disassembly and Assembly
Figure 4-87. Gear Assy Drive Removal
Revision B
184