EPSON EPL-N3000/AcuLaser M4000N
Installation
1.
Install the MOTOR DUPLEX to the BRACKET MOTOR with the two screws
(gold, 6mm).
When installing the MOTOR DUPLEX, pay attention to its
C A U T I O N
installation orientation.
2.
Install the BRACKET MOTOR to the COVER HSG DUP with the three screws
(gold, tapping, 8mm).
When installing the BRACKET MOTOR, be careful not to mislay
C H E C K
the gears.
P O I N T
3.
Install the SPRING LATCH between the BRACKET MOTOR and LEVER
LATCH LEFT.
4.
Install the HARNESS ASSY DUP EARTH with the one screw (silver, 6mm).
5.
Install the PWBA DUPLEX. (p.347)
When installing the PWBA DUPLEX, pay attention to its
C A U T I O N
installation orientation.
6.
Install the COVER TOP. (p.346)
When installing the COVER TOP, match its positioning holes with
C H E C K
the bosses of the COVER HSG DUP.
P O I N T
7.
Install the COVER LEFT. (p.353)
Disassembly and Assembly
When installing the COVER LEFT, match its positioning holes
C H E C K
with the bosses of the COVER HSG DUP.
P O I N T
Option Duplex
Revision C
356
Confidential