Low Ind Front - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.4.10 LOW IND FRONT

Removal
1. Remove the COVER CST from the cassette body.
2. Remove the HANDLE EXTENSION 550. (p.206)
3. Turn the LOW INDICATOR 90 degrees, and remove the LOW INDICATOR and
LOW IND FRONT together from the HANDLE EXTENSION 550.
4. Unhook the claw on one side of the LOW IND FRONT, and remove the LOW
IND FRONT from the LOW INDICATOR.
Installation
1. Install the LOW IND FRONT to the LOW INDICATOR.
When installing the LOW IND FRONT to the LOW INDICATOR,
C A U T I O N
be careful of the orientation of the LOW IND FRONT.
2. Turn the LOW INDICATOR 90 degrees in the direction opposite to the arrow, and
install the LOW INDICATOR and LOW IND FRONT together to the HANDLE
EXTENSION 550.
3. Install the HANDLE EXTENSION 550. (p.206)
4. Install the COVER CST to the cassette body.
After completion of assembling, move the PLATE ASSY BTM up/
C H E C K
down, and make sure that the LOW IND FRONT moves up/down
P O I N T
synchronously.
Disassembly and Assembly
HANDLE EXTENSION 550
LOW IND FRONT
Figure 4- 38. LOW IND FRONT Removal
550 Paper Cassette
LOW INDICATOR
3-2)
3-1)
4)
LOW INDICATOR
JG3029AB
Revision C
210
Confidential