Option Duplex - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.12 Option Duplex

4.12.1 Option Duplex
Carry out removal/installation work with care not to drop the
C A U T I O N
Option Duplex.
Removal
1. Loosen the two pieces of SCREW THUMB securing the Option Duplex.
2. Push down the LEVER LATCH RIGHT and release the hooks of the LEVER
LATCH RIGHT and LEVER LATCH LEFT.
3. Tilt the Option Duplex to the front, and remove the connector (P/J2750) of the
HARNESS ASSY DUP from the printer body.
4. Disengage the left and right bosses of the HSG LOWER DUP.
5. Release the two hooks at the bottom of the HSG LOWER DUP, and remove the
Option Duplex from the printer body.
Installation
1. Insert the two hooks at the bottom of the HSG LOWER DUP into the holes of the
printer body.
When installing the Option Duplex, securely insert the two hooks at
C H E C K
its bottom into the holes of the printer body.
P O I N T
2. Press the Option Duplex against the printer body, connect the connector (P/J2750)
of the HARNESS ASSY DUP, and engage the bosses. At this time, the Option
Duplex is locked to the printer body by the LEVER LATCH RIGHT and LEVER
LATCH LEFT.
3. Tighten the two SCREWs THUMB to fix the Option Duplex to the printer body.
Disassembly and Assembly
Securely tighten the SCREWs THUMB to fix the Option Duplex
C H E C K
tightly.
P O I N T
LEVER LATCH RIGHT
2)
Option Duplex
5-2)
1)
SCREW THUMB
Figure 4- 143. Option Duplex Removal
Option Duplex
Revision C
HOOK
5-1)
JG3601EA
342
Confidential