EPSON EPL-N3000/AcuLaser M4000N
Installation
1.
Move and install the ROLL OCT LOWER in the direction opposite to the arrow.
When installing the ROLL OCT LOWER, be careful not to hold its
C A U T I O N
rubber portion.
2.
Install the BEARING ROLL on the GEAR 19 side.
3.
Install the GEARs 19, GEARs 45, and GEAR 19/37 in this order.
Install the GEARs 19 in the correct orientation.
C A U T I O N
4.
Install the BRACKET MOTOR OCT with the two screws (gold, tapping, 8mm).
5.
Install the SUPPORT OCT LEFT with the two screws (gold, tapping, 8mm).
6.
Install the COVER OCT. (p.364)
7.
Install the COVER REAR. (p.362)
Disassembly and Assembly
Option OCT
Revision C
375
Confidential