Cover Front - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.13.5 COVER FRONT

Removal
1. Remove the COVER REAR. (p.362)
2. Remove the COVER OCT. (p.364)
3. Remove the three screws (gold, tapping, 8mm) securing the COVER FRONT to
the printer body, and remove the COVER FRONT.
When removing the COVER FRONT, be careful not to mislay the
C A U T I O N
GEAR CAM as it comes off.
Installation
1. Make sure that the GEAR CAM engages with the GEAR of the MOTOR ASSY
OFFSET, and that the boss of the GEAR CAM is in the groove of the CHUTE
OFFSET.
2. Secure the COVER FRONT to the printer body with the three screws (gold,
tapping, 8mm).
3. Install the COVER OCT. (p.364)
4. Install the COVER REAR. (p.362)
Disassembly and Assembly
COVER FRONT
Figure 4- 161. COVER FRONT Removal
GEAR CAM
Figure 4- 162. COVER FRONT Removal
Option OCT
Revision C
3)
GEAR CAM
JG3805AB
CHUTE OFFSET
GEAR OF MOTOR ASSY OFFSET
JG3806AA
Confidential
366