Chute Up Exit, Chute Low Exit - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.8.3 CHUTE UP EXIT, CHUTE LOW EXIT

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the COVER LEFT. (p.169)
4. Remove the COVER RIGHT. (p.168)
5. Remove the COVER EXIT 500. (p.261)
6. Remove the 500 EXIT ASSY. (p.262)
7. Remove the two screws (gold, tapping, 8mm) securing the CHUTE UP EXIT to
the CHUTE LOW EXIT.
8. Separate the CHUTE UP EXIT and CHUTE LOW EXIT.
Disassembly and Assembly
(SEE Note1)
LINK GATE OCT
Figure1
Figure 4- 74. CHUTE UP EXIT, CHUTE LOW EXIT Removal
500 Paper Exit
7)
CHUTE UP EXIT
8)
CHUTE LOW EXIT
CHUTE UP EXIT
Figure2
Revision C
263
Confidential