Motor Assy Oct - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.13.13 MOTOR ASSY OCT

Removal
1. Remove the COVER REAR. (p.362)
2. Remove the COVER OCT. (p.364)
3. Disconnect the connector of the MOTOR ASSY OCT from the HARNESS ASSY
OCT MOT.
4. Remove the two screws (gold, 6mm) securing the MOTOR ASSY OCT, and
remove the MOTOR ASSY OCT.
Installation
1. Install the MOTOR ASSY OCT with the two screws (gold, 6mm).
2. Connect the connector of the MOTOR ASSY OCT to the HARNESS ASSY OCT
MOT.
3. Install the COVER OCT. (p.364)
4. Install the COVER REAR. (p.362)
Disassembly and Assembly
Figure 4- 173. MOTOR ASSY OCT Removal
Option OCT
MOTOR ASSY OCT
(PL23.1.6)
4-2)
Revision C
4-1)
3)
JG3817AA
378
Confidential