Guide Indicator 3 - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.4.8 GUIDE INDICATOR 3

Removal
1. Remove the COVER CST from the cassette body.
2. Remove the HANDLE EXTENSION 550. (p.206)
When removing the HANDLE EXTENSION 550, take care not to
C A U T I O N
mislay the LOW INDICATOR and LOW IND FRONT as they will
come off.
3. While pushing the lock of the STOPPER GEAR, unlock the LEVER BTM LOCK,
and raise the PLATE ASSY BTM.
4. Move away the link lever of the GUIDE INDICATOR 1, and remove it from the
PLATE ASSY BTM.
5. With the link lever pushed down to the bottom of the cassette, pull out the GUIDE
INDICATOR 3 from the front of the HOUSING EXTENSION 550 slowly by
application of force.
Installation
1. With the link lever pushed down to the bottom of the cassette, install the GUIDE
INDICATOR 3 from the front of the HOUSING EXTENSION 550.
Match the groove of the GUIDE INDICATOR 1 and the protrusion
C H E C K
part of the GUIDE INDICATOR 3.
P O I N T
2. Insert the link lever of the GUIDE INDICATOR 1 into the hole of the PLATE
ASSY BTM.
3. Install the LOW IND FRONT. (p.210)
4. Install the HANDLE EXTENSION 550. (p.206)
5. Install the COVER CST to the cassette body.
Disassembly and Assembly
After completion of assembling, move the PLATE ASSY BTM up/
C H E C K
down, and make sure that the LOW IND FRONT moves up/down
P O I N T
synchronously.
LEVER BTM LOCK
STOPPER GEAR
PLATE ASSY BTM
Figure 4- 36. GUIDE INDICATOR 3 Removal
550 Paper Cassette
3)
GUIDE INDICATOR 1
4)
GUIDE INDICATOR 3
Revision C
5)
JG3027AA
207
Confidential