EPSON EPL-N3000/AcuLaser M4000N
4.5 150 Paper Feeder
4.5.1 150 FEEDER ASSY
Disassembly procedures for this part are different between EPL-
C H E C K
N3000 and AcuLaser M4000N. For AcuLaser M4000N, see
P O I N T
150 FEEDER ASSY (AcuLaser M4000N)
Removal
1.
Remove the COVER REAR 500. (p.270)
2.
Remove the FUSER ASSY. (p.253)
3.
Remove the COVER REAR. (p.167)
4.
Remove the FAN MAIN. (p.293)
5.
With the BTR ASSY installed, remove the CHUTE TRANSFER.
6.
Disconnect the connector (P/J245) of the HARNESS ASSY TRAY1 from the
HARNESS ASSY CHUTE.
7.
Remove the five screws (sliver, with collars, with spring washers, 8mm) securing
the 150 FEEDER ASSY to the printer body.
8.
Shift the 150 FEEDER ASSY to the rear, and disengage the boss on the right side
of the 150 FEEDER ASSY from the frame.
9.
Lift the 150 FEEDER ASSY in the direction of the arrow (A), and disengage the
boss on the left side of the 150 FEEDER ASSY.
The FEEDER ASSY clicks midway when lifted, but lift it by
C H E C K
application of slight force.
P O I N T
10. Remove the 150 FEEDER ASSY from the printer body.
Disassembly and Assembly
4.14.3
(p.382).
(p.258)
150 Paper Feeder
9)
6)
(A)
9)
8)
10)
150 FEEDER ASSY
7)
Figure 4- 39. 150 FEEDER ASSY Removal
Revision C
JG3148AB
211
Confidential