Motor Duplex - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.12.11 MOTOR DUPLEX

Removal
1. Remove the COVER LEFT. (p.353)
2. Remove the COVER TOP. (p.346)
3. Remove the PWBA DUPLEX. (p.347)
4. Remove the one screw (silver, 6mm) securing the HARNESS ASSY DUP
EARTH.
5. Remove the three screws (gold, tapping, 8mm) securing the BRACKET MOTOR
to the COVER HSG DUP.
6. Remove the SPRING LATCH installed between the LEVER LATCH LEFT and
BRACKET MOTOR.
7. Remove the BRACKET MOTOR mounted with the MOTOR DUPLEX and
SWITCH DUPLEX.
When removing the BRACKET MOTOR, be careful not to mislay
C A U T I O N
the gears installed to the COVER HSG DUP.
8. Remove the two screws (gold, 6mm) securing the MOTOR DUPLEX to the
BRACKET MOTOR.
9. Remove the MOTOR DUPLEX.
Disassembly and Assembly
7)
6)
4)
5)
BRACKET MOTOR
Figure 4- 154. MOTOR DUPLEX Removal
Option Duplex
8)
MOTOR DUPLEX
HARNESS ASSY DUP EARTH
COVER HSG DUP
SPRING LATCH
Revision C
JG3616AB
355
Confidential