Epson EPL-N3000 Service Manual page 176

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Install the ROLL ASSY RETARD to the SHAFT RETARD, and secure it with the
hooks.
When installing it, take care not to hold any rubber portion of the
C A U T I O N
ROLL ASSY RETARD.
Engage the hooks of the ROLL ASSY RETARD with the grooves in
C H E C K
the SHAFT RETARD properly.
P O I N T
2. Move the HOLDER RETARD in the direction opposite to the arrow, and install it
to the 150 PAPER CASSETTE.
After installation, push down the HOLDER RETARD and release
C H E C K
your hand. At this time, make sure that the HOLDER RETARD
P O I N T
returns to the original position by the spring force of the SPRING
RETARD.
3. Install the 150 PAPER CASSETTE to the printer body.
Disassembly and Assembly 150 Paper Cassette
Revision C
176
Confidential