EPSON EPL-N3000/AcuLaser M4000N
5.3 Firmware Update
This section explains how to update the firmwares.
Controller firmware
OUTLINE
Unit
Data foemat
Controller
RCC
CRB
First use the RCC file to update the controller firmware. Only
C A U T I O N
when the update using the RCC file is failed, use the CRB file.
The firmware of the Engine Controller cannot be updated
because a masked ROM is used for it.
TOOL
Firmware update is executed by transmitting data for updating the program from the
computer via USB using the exclusive software tool. Make sure to use the software
tool described below.
Tool Name: Firmware Update Tool
Adjustment
Operation
Panel operation
Tool
Not required
Required
Required
Required
Firmware Update
Revision C
401
Confidential