Cover Front - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.2.5 COVER FRONT

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the COVER LEFT. (p.169)
4. Remove the COVER RIGHT. (p.168)
5. Remove the COVER EXIT 500. (p.261)
6. Remove the 500 EXIT ASSY. (p.262)
7. Remove the COVER TOP, CONTROL PANEL. (p.170)
8. While pushing the two hooks at the top of the COVER FRONT, tilt the COVER
FRONT toward front.
9. Shift the COVER FRONT in the direction of the arrow and release the two hooks
at the bottom of the COVER FRONT, and remove it from the printer body.
Installation
1. Fit the two hooks at the bottom of the COVER FRONT into the printer body.
2. Fit the two hooks at the top of the COVER FRONT into the printer body to secure
the COVER FRONT to the printer body.
3. Install the COVER TOP, CONTROL PANEL. (p.170)
4. Install the 500 EXIT ASSY. (p.262)
When installing it, pass the harnesses of the MOTOR ASSY EXIT
C A U T I O N
and HARNESS ASSY EXIT SNR1 through the hole of the frame.
5. Install the COVER EXIT 500. (p.261)
6. Install the COVER RIGHT. (p.168)
7. Install the COVER LEFT. (p.169)
8. Install the COVER REAR. (p.167)
9. Install the COVER REAR 500. (p.270)
Disassembly and Assembly
8)
(1)
(2)
9)
Figure 4- 8. COVER FRONT Removal
Cover
Revision C
JG3171AA
172
Confidential