EPSON EPL-N3000/AcuLaser M4000N
Table 3-13. Troubleshooting for "Paper Jam/Tray to Regi" (continued)
Step
Action and Question
ROLL ASSY RETARD
1. Check the ROLL ASSY RETARD installed on
5
each Paper Cassette.
♦
Is the ROLL ASSY RETARD clean and installed
normally?
Test Printing
1. Feed paper from Tray 1 or Tray 2 to execute test
printing.
6
2. When there is an optional feeder, feed paper from
Tray 3 or Tray 4 to execute test printing.
♦
Does the error occur?
Position of paper
7
1. Remove the Imaging Cartridge.
♦
Is the leading edge of paper in contact with the
ACTUATOR B of the SENSOR REGI?
Paper feed tray
8
1. Check the paper feed tray during execution of test
printing.
♦
Was paper fed from the Tray 1 or Tray 2?
CHUTE ASSY FDR1/2
9
1. Turn each gear and roller of the CHUTE ASSY
FDR1/2 by hand.
♦
Does each gear and roller turn smoothly?
Paper feed tray
10
1. Check the paper feed tray during execution of test
printing.
♦
Was paper fed from the Tray 3 or Tray 4?
550 FEEDER OPTION
11
1. Turn each gear or roller of the 550 FEEDER
OPTION by hand.
♦
Does each gear or roller turn smoothly?
ROLL ASSY TURN
12
1. Turn the ROLL ASSY TURN by hand.
♦
Does the ROLL ASSY TURN turn smoothly?
Troubleshooting
Yes
No
Replace the
Go to Step 6
ROLL ASSY
RETARD
Go to Step 7
Problem solved
Go to
3.4.5
Go to Step 8
SENSOR REGI
(p.117)
Go to Step 9
Go to Step 10
Replace the
Go to Step 10
CHUTE ASSY
FDR1/2
Check that paper
Go to Step 11
has been set, and
then go to Step 8
Replace the
OPTION 550
Go to Step 12
PAPER
FEEDER
Replace the
Replace ROLL
HVPS/MCU
ASSY TURN
Troubleshooting When There is Error Display
Revision C
80
Confidential