Gate Fu - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.8.14 GATE FU

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the five screws (gold, tapping, 6mm) securing the CHUTE LOW FU to
the COVER REAR 500.
3. Release the hook of the COVER REAR 500, and remove the CHUTE LOW FU
from the COVER REAR 500.
4. Remove the LEVER GATE HOLDER, SPRING LEVER GATE, LEVER GATE FU.
(p.272)
5. Remove the two screws (gold, tapping, 6mm) securing the CHUTE UP FU.
6. Remove the CHUTE LOW FU while bowing the GATE FU.
Be careful not to damage the GATE FU since it might break when
C A U T I O N
giving a big force to it.
Installation
1. Install the GATE FU to the CHUTE LOW FU.
2. Secure the CHUTE UP FU with the two screws (gold, tapping, 6mm).
3. Install the LEVER GATE HOLDER, SPRING LEVER GATE, LEVER GATE FU.
(p.272)
4. Install the CHUTE LOW FU to the COVER REAR 500, and secure it at the hook.
5. Secure the CHUTE LOW FU to the COVER REAR 500 with the five screws
(gold, tapping, 6mm).
6. Install the COVER REAR 500. (p.270)
Disassembly and Assembly
Figure 4- 86. GATE FU Removal
500 Paper Exit
Revision C
GATE FU
JG3306AA
Confidential
275