EPSON EPL-N3000/AcuLaser M4000N
4.7.3 SHIELD PLATE ROS
Removal
1.
Remove the COVER REAR 500. (p.270)
2.
Remove the COVER REAR. (p.167)
3.
Remove the COVER LEFT. (p.169)
4.
Remove the COVER RIGHT. (p.168)
5.
Remove the COVER EXIT 500. (p.261)
6.
Remove the 500 EXIT ASSY. (p.262)
7.
Remove the COVER TOP, CONTROL PANEL. (p.170)
8.
Remove the COVER FRONT. (p.172)
9.
Remove the DUCT FRONT, FAN SUB. (p.241)
10. Remove the FUSER ASSY. (p.253)
11. Remove the ROS ASSY. (p.239)
Never give impact to the ROS ASSY with a screwdriver or the like.
C A U T I O N
12. Remove the two screws (black, with collars, 8mm) securing the SHIELD PLATE
ROS to the frame.
13. Move and remove the SHIELD PLATE ROS in the direction of the arrow.
Disassembly and Assembly
13)
Figure 4- 61. SHIELD PLATE ROS Removal
Xero
Revision C
12)
SHIELD PLATE ROS
JG3158AB
Confidential
243