EPSON EPL-N3000/AcuLaser M4000N
4.11.13 ROLL ASSY TURN
Removal
1.
Remove the 550 FEEDER OPTION. (p.311)
2.
Remove the CLUTCH PR-REGI. (p.319)
3.
Remove the E rings securing the BEARINGs FEEDER at both ends of the ROLL
ASSY TURN.
4.
Remove the BEARING FEEDER from the CHUTE OUT.
5.
Move the ROLL ASSY TURN as indicated by the arrow to remove it from the
CHUTE OUT.
In removal, take care not to hold any rubber portion of the ROLL
C A U T I O N
ASSY TURN.
Installation
1.
Move the ROLL ASSY TURN in the direction opposite to the arrow, and install it to the
CHUTE OUT.
When installing it, take care not to hold any rubber portion of the
C A U T I O N
ROLL ASSY TURN.
2.
Install the BEARINGs FEEDER to the CHUTE OUT.
3.
Install the E rings to both ends of the ROLL ASSY TURN to secure the
BEARINGs FEEDER.
4.
Install the CLUTCH PR-REGI. (p.319)
When installing it, match the notch of the CLUTCH PR-REGI to
C A U T I O N
the boss of the CHUTE OUT.
Disassembly and Assembly
5.
Install the 550 FEEDER OPTION. (p.311)
BEARING FEEDER
3)
4)
Figure 4- 121. ROLL ASSY TURN Removal
Option 550 Paper Feeder
ROLL ASSY TURN
5)
CHUTE OUT
Revision C
BEARING FEEDER
3)
JG3514AA
317
Confidential