Cover Rear Dup (Aculaser M4000N) - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.14.10 COVER REAR DUP (AcuLaser M4000N)

1. Remove the HSG UPPER ASSY. (p.343)
2. Remove the COVER LEFT. (p.353)
3. Remove the COVER RIGHT. (p.354)
4. Remove the COVER TOP (AcuLaser M4000N). (p.393)
5. Disconnect the connector of the harness from the connector (P/J54) of the PWBA
DUPLEX.
6. Disconnect the harness of the FAN DUPLEX from the hook of the COVER HSG
DUP.
7. Remove the four screws (gold, tapping, 8mm) securing the COVER REAR DUP
to the COVER HSG DUP.
8. Remove the COVER REAR DUP.
Installation
1. Install the COVER REAR DUP to the COVER HSG DUP with the four screws
(silver, tapping, 8mm).
2. Secure the harness of the FAN DUPLEX with the hook of the COVER HSG DUP.
3. Connect the connector (P/J54) of the harness from the connector of the PWBA
DUPLEX.
4. Install the COVER TOP (AcuLaser M4000N). (p.393)
5. Install the COVER RIGHT. (p.354)
When installing the COVER RIGHT, match its positioning holes
C H E C K
with the bosses of the COVER HSG DUP.
P O I N T
6. Install the COVER LEFT. (p.353)
7. Install the HSG UPPER ASSY. (p.343)
Disassembly and Assembly
COVER HSG DUP
AcuLaser M4000N Unique Disassembly Procedures
FAN DUPLEX
PWBA DUPLEX
Figure 4- 183. COVER TOP Removal
Revision C
JG3604AB
394
Confidential