Epson EPL-N3000 Service Manual page 152

EPSON EPL-N3000/AcuLaser M4000N
Step Action and Question
Image transfer process
1. Inspect the toner image formed on the drum located
9
just after the transfer portion (the BTR).
♦
Is the toner image on the drum completely copied
onto the paper?.
Heat Roll and Pressure Roll
1. Remove the FUSER ASSY. (p.253)
WARNING!: Wait until the Fuser cools, and
then start work.
10
2. Turn the Gear HR by hand, and inspect the Heat
Roll and the Pressure Roll.
♦
Are the Heat Roll and the Pressure Roll free from
scratches, dirt and damage?
Troubleshooting
Yes No
Replace the
Go to Step 10
BTR ASSY
See "Parts
below can be Replace the
the source of FUSER ASSY
this error"
Picture Image Trouble
Revision C
152
Confidential