Main Assembly F: Fixing Plate, The Gear, Reduction And Gear, Idler - Epson EU-T432 Technical Manual

Confidential

Main Assembly F: Fixing plate, the Gear, reduction and Gear, idler

Reassembly
Part name
step
1 Fixing plate
C.B.S-tite (M3 × × × × 5)
2 Gear, reduction
3 Gear, idler
R.E. (2.5)
Rev. A
Install the fixing plate to the frame assembly, and secure it with the screw
× 1
while pushing the edge of the fixing plate to the bearing, platen.
bearing, platen
fixing plate
C.B.S-tite (M3 × 5)
<Check>
Tightening torque: 834 to 932 mN•m {8.5 to 9.5 kg•cm}
Make sure that the edge of the fixing plate is pushed securely to the
bearing, platen.
Install the gear, reduction and the gear, idler to the shafts on the frame
× 2
assembly, and secure them with R.E.s.
R.E. (2.5)
gear, idler
frame assembly
<Check>
Make sure not to deform the shaft on the frame assembly when securing
with the R.E.
EU-T432 Technical Manual
Assembly procedure
frame assembly
gear, reduction
shafts
Assembly and Disassembly 6-23