Roll Assy Nudger, Roll Assy Feed - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.6.2 ROLL ASSY NUDGER, ROLL ASSY FEED

Removal
1. Open the COVER OPEN so that you can check your replacement work with your
eyes.
2. Remove the Paper Cassettes of the Tray 1 and Tray 2.
3. Lift the 150 FEEDER ASSY.
The 150 FEEDER ASSY clicks midway when lifted, but lift it by
C H E C K
application of slight force.
P O I N T
4. Hold down the 150 FEEDER ASSY, put your hand into the place where the Paper
Cassettes were mounted, release the hook of the ROLL ASSY NUDGER, and pull
the ROLL ASSY NUDGER out of the SHAFT NUDGER.
5. Similarly, release the hook of the ROLL ASSY FEED, and pull the ROLL ASSY
FEED out of the SHAFT FEED.
In removal, take care not to hold any rubber portion of the ROLL
C A U T I O N
ASSY NUDGER or ROLL ASSY FEED.
Installation
1. Hold down the 150 FEEDER ASSY, put your hand into the place where the Paper
Cassettes were mounted, install the ROLL ASSY FEED to the SHAFT FEED, and
secure it with the hook.
Engage the hooks of the ROLL ASSY FEED with the grooves
C A U T I O N
in the SHAFT FEED properly.
When installing the ROLL ASSY NUDGER or ROLL ASSY
FEED, take care not to hold its rubber portion.
2. Similarly, install the ROLL ASSY NUDGER to the SHAFT NUDGER, and
secure it with the hook.
Disassembly and Assembly
Engage the hooks of the ROLL ASSY NUDGER with the grooves in
C A U T I O N
the SHAFT NUDGER properly.
3. Push down the 150 FEEDER ASSY and return it to the original position.
4. Install the Paper Cassettes to the Tray 1 and Tray 2.
5. Close the COVER OPEN.
1)
Figure 4- 50. ROLL ASSY NUDGER, ROLL ASSY FEED Removal
550 Paper Feeder
Revision C
ROLL ASSY FEED
5)
4)
ROLL ASSY NUDGER
150 FEEDER ASSY
JG3011EA
226
Confidential