Roll Oct Lower - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.13.11 ROLL OCT LOWER

Removal
1. Remove the COVER REAR. (p.362)
2. Remove the COVER OCT. (p.364)
3. Remove the two screws (gold, tapping, 8mm, gold, 6mm) securing the SUPPORT
OCT LEFT.
4. Remove the two screws (gold, tapping, 8mm) securing the BRACKET MOTOR
OCT.
5. Disconnect the harness connector of the MOTOR ASSY OCT, and remove the
BRACKET MOTOR OCT mounted with the MOTOR ASSY OCT.
6. Remove the GEARs 45, GEAR 19/37, and GEARs 19.
7. Release the hook of the GEAR 19 side BEARING ROLL, and remove the
BEARING ROLL from the HOUSING OCT.
Carefully handle the hook of the BEARING ROLL as it may be
C A U T I O N
damaged by application of large force.
8. Move and remove the ROLL OCT LOWER in the direction of the arrow.
When removing the ROLL OCT LOWER, be careful not to hold its
C A U T I O N
rubber part.
Disassembly and Assembly
6)
GEAR 19
8-1)
7)
BEARING ROLL
HOUSING OCT
Figure 4- 170. ROLL OCT LOWER Removal
Option OCT
SUPPORT OCT LEFT
3)
6)
GEAR 19/37
6)
GEAR 19
BRACKET MOTOR OCT
6)
GEAR 45
8-2)
ROLL OCT LOWER
Revision C
4)
JG3814AB
374
Confidential