Epson EPL-N3000 Service Manual page 316

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Install the ROLL ASSY GEAR NUDGER to the SHAFT NUDGER, and secure it
with the hook.
Engage the hook of the ROLL ASSY GEAR NUDGER with the
C A U T I O N
groove in the SHAFT NUDGER properly.
When installing the ROLL ASSY GEAR NUDGER, take care
not to hold its rubber portion.
2. Install the ROLL ASSY NUDGER to the SHAFT NUDGER, and secure it with
the hook.
Engage the hook of the ROLL ASSY NUDGER with the groove
C A U T I O N
in the SHAFT NUDGER properly.
When installing the ROLL ASSY NUDGER, take care not to
hold its rubber portion.
3. Install the HOLDER LEFT and ACTUATOR NO PAPER to the SUPPORT
NUDGER.
Securely fit the shafts on both ends of the ACTUATOR NO
C A U T I O N
PAPER into the HOLDER LEFT and SUPPORT NUDGER.
Hitch the hook of the ACTUATOR NO PAPER on the
HOLDER LEFT.
4. By inserting the three hooks, install the HOLDER LEFT to the 550 FEEDER
OPTION.
After installation, operate the ACTUATOR NO PAPER with your
C A U T I O N
finger and make sure that it moves properly.
Disassembly and Assembly
HOLDER
LEFT
LIFT UP
(BOSS)
1-1)
Figure 4- 120. ROLL ASSY GEAR NUDGER Installation
Option 550 Paper Feeder
DETAILED VIEW OF A
ACTUATOR NO PAPER
CLAW
Revision C
HOOK
HOLDER
LEFT
JG3513AA
316
Confidential