EPSON EPL-N3000/AcuLaser M4000N
4.7.13 LEVER LINK, LINK GEAR 3
Removal
1.
Remove the COVER REAR 500. (p.270)
2.
Remove the COVER REAR. (p.167)
3.
Remove the FUSER ASSY. (p.253)
4.
Remove the COVER LEFT. (p.169)
5.
Remove the COVER RIGHT. (p.168)
6.
Remove the COVER EXIT 500. (p.261)
7.
Remove the 500 EXIT ASSY. (p.262)
8.
Remove the COVER TOP, CONTROL PANEL. (p.170)
9.
Remove the COVER FRONT. (p.172)
10. Remove the BTR ASSY. (p.254)
11. Remove the DUCT FRONT, FAN SUB. (p.241)
12. Remove the ROS ASSY. (p.239)
Never give impact to the ROS ASSY with a screwdriver or the like.
C A U T I O N
13. Remove the SHIELD PLATE ROS. (p.243)
14. Remove the GUIDE TRAY LEFT. (p.236)
15. Remove the MOTOR COVER. (p.277)
16. Remove the SHIELD PLATE LVPS. (p.285)
17. Remove the GUIDE CRU LEFT. (p.245)
18. Remove the COVER GUIDE CRU and HARNESS ASSY FUSER from the
GUIDE CRU LEFT.
(p.251)
19. Remove the LEVER LINK and LINK GEAR 3 together.
Disassembly and Assembly
LINK GEAR 3
GUIDE CRU LEFT
Figure 4- 71. LEVER LINK, LINK GEAR 3 Removal
Xero
LEVEL LINK
Revision C
259
Confidential