Connecting The Power Cables; Installing The Psu Module / Dummy Cover - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

6.3.3.6

Connecting the power cables

Figure 62: Connecting the power cables to the power distribution board
Ê Connect the two power cables from the power distribution board.
6.3.3.7

Installing the PSU module / dummy cover

Ê Install the PSU module as described in section
module" on page
Ê If a second PSU module has been installed before, install this one in the
same way.
Ê If no second power supply module has been installed before, install the
dummy cover as described in section
page 143.
TX140 S1
142.
Upgrade and Maintenance Manual
"Installing the power supply
"Installing the PSU dummy cover" on
Power supply
157