Specifying A Channel Name And Color Label - RSS M-380 Owner's Manual

Specifying a channel name
and color label
You can specify a channel name and color label for each input
channel. The channel name can be up to six characters, and you can
select one of eight colors as the color label.
Channel name entry and color label selection are done in the NAME
EDIT popup.
Accessing the NAME EDIT popup
1.
Access the CHANNEL DISPLAY screen for the desired
channel.
fig.ScrChDisp.eps
2.
Press [F2 (NAME EDIT)] to access the NAME EDIT popup.
fig.ScrChNameEditGuide.eps
A
A.TEMPLATE
Here you can select a name from a list.
•CATEGORY list
Select the category.
•NAME list
Select a name from within that category.
Choose the CATEGORY first, and then choose a NAME.
B.Name edit field
You can edit the name in this field.
B
C
Input channel operations
C.Color label selection buttons
Use these buttons to select a color label for the channel.
The function buttons have the following operations.
[F1 (Recall Enters the name selected in the TEM-
Template)] PLATE list into the name edit field.
[F2 (HISTORY)] Successively recalls the channel names
that have been entered since power-up,
starting with the most recent name.
[F3 (INSERT)] Inserts a space at the cursor location. The
characters to the right of the cursor loca-
tion will move to the right.
[F4 (A/a)] Changes the letter at the cursor location
between uppercase and lowercase. If the
character is not an English letter, it will
be changed to the letter "A."
[F5 (NUM)] Changes the character at the cursor loca-
tion to the numeral "0."
[F6 (DELETE)] Deletes the character at the cursor loca-
tion. The characters to the right of the
cursor location will move to the left.
[F8 (CLOSE)] Closes the popup.
Up to sixteen names will be remembered in HISTORY.
If HISTORY becomes full, the oldest name will be deleted.
Editing the channel name
1.
Access the NAME EDIT popup for the desired channel.
fig.ScrChNameEdit.eps
2.
Move the cursor to the name edit field, and edit the channel
name.
Use the cursor left/right buttons to move the cursor location.
Use the value dial to change the character at the cursor location.
3.
Press [F8 (CLOSE)] to close the popup.
Choosing a color label
1.
Access the NAME EDIT popup for the desired channel.
fig.ScrChNameEdit.eps
51