Reac Connection Examples; Foh Console Setup - RSS M-380 Owner's Manual

REAC connection examples

Here we show some examples of REAC setups and connections. For
details on REAC settings for the M-380, refer to "REAC settings" (p.
162).

FOH console setup

fig.REACsplit2_2.eps
To Monitor / Broadcast Console
REAC SPLITTER
Set the M-380's REAC setting to FOH (p. 162). The M-380's REAC A
and REAC B will both be the master. Connect the REAC A port split
to the monitor console, and connect the SPLIT/BACKUP port to the
broadcast console.
The REAC A (split REAC) of the monitor console and the broadcast
console will receive the following signals.
REAC A INPUT 1–8 FOH console REAC A OUTPUT 1–8
REAC A INPUT 9–24 S-1608(A) INPUT 1–16
REAC A INPUT 25– 40 S-1608(B) INPUT 1–16
If a slave REAC device is not connected to the REAC A port of
the FOH console, you cannot connect a split REAC device to the
SPLIT/BACKUP port.
S-1608 (A) S-1608 (B)
SLAVE SLAVE
REAC SPLITTER
FOH CONSOLE
REAC applications and settings
By using the S-1608 and S-4000S-3208 as input/output units,
you'll be able to receive forty-eight channels of input from the
stage. In this case, the following signals will be received by the
monitor console and broadcast console.
• REAC A port: S-4000S-3208, REAC B port: S-1608
fig.REAC3208_type1.eps
To Monitor / Broadcast Console
REAC SPLITTER REAC SPLITTER
• REAC A port: S-1608, REAC B port: S-4000S-3208
fig.REAC3208_type2.eps
To Monitor / Broadcast Console
REAC SPLITTER REAC SPLITTER
S-4000S-3208 S-1608
SLAVE SLAVE
FOH CONSOLE
S-1608 S-4000S-3208
SLAVE SLAVE
FOH CONSOLE
159