Fader Operations; On/Off Buttons; Popup Access Buttons - RSS M-380 Owner's Manual

Basic operation
Button operations
Buttons in the screen are used to turn a function on/off, to execute a
command, or to access a screen. To operate a button, move the
cursor to the desired button and press [ENTER].

ON/OFF buttons

fig.BtnOnOff.eps
These are used to turn a parameter or function on/off. The button is
shown in gray when off, or in color (e.g., red, yellow, or blue) when on.

Popup access buttons

fig.BtnPopup.eps
These are used to access a related popup.
Select buttons
There are the following two types of select buttons.
• Radio buttons
fig.BtnRadio.eps
These are used to select one of multiple mutually exclusive choices.
Only the last-selected button will be selected.
• Check buttons
fig.BtnSel.eps
These are used when it is possible to select more than one of multiple
choices. You can select more than one of these items if desired.
ALL/CLR buttons
fig.BtnAllClr.eps
These buttons assist you in operating check buttons. Pressing the
ALL button will select all applicable check buttons. Pressing the CLR
button will clear all applicable check buttons.
38
Knob operations
fig.Cursor.eps
Knobs in the screen can be operated by the knobs of the CHANNEL
EDIT section or by the value dial. To use the value dial, move the
cursor to the desired knob.
You can make more detailed settings by holding down [SHIFT]
while you operate the knobs or the value dial.
Purple knobs in the screen cannot be edited from the
CHANNEL EDIT section.

Fader operations

fig.Fader.eps
Faders in the screen can be operated by the corresponding fader
controller or by the value dial. To use the value dial, move the cursor
to the desired fader.
You can make more detailed settings by holding down [SHIFT]
while you operate the value dial.
List operations
fig.List.eps
The selected item in a list is shown highlighted in red. Use the up/
down keys or the value dial to select a different item.