Parameter Changes When The Lcr System Is On - RSS M-380 Owner's Manual

2.
Centr (center)
This specifies the proportion of the signal that is sent to MAIN
C when PAN is at C (center) as a value in the range of 0%–100%.
Centr Explanation
0% No signal will be sent to MAIN C.
100% When PAN is set to C, the signal will be sent only to
MAIN C.
fig.Pan_LCR.eps
Center 0% Center 50%
L C R L
PAN
This is valid only when the LCR button is on.
3.
LR button
This turns on/off the signal that is sent from the channel to
MAIN L/R. The left/right panning is specified by PAN.
This is shown only if the LCR button is off.
4.
C button
This turns on/off the signal that is sent from the channel to
MAIN C. This signal is not affected by PAN.
This is shown only if the LCR button is off.
Center 100%
C R L C
PAN PAN
Parameter changes when
the LCR SYSTEM is on
Added choices related to LCR SYSTEM
(when the LCR SYSTEM is on)
• MAIN C
fig.SELMainC.eps
"MAIN C" is shown as a choice of channel in the following
screens and popups.
Screen/Popup
AUX/MAIN
COPY
FX INSERT/
R
SOURCE SELECT
GEQ INSERT SE-
LECT
EXT FX INSERT
SELECT
DCA GROUP AS-
SIGN
MUTE GROUP
ASSIGN
TALKBACK/OS-
CILLATOR
MONITOR
RECORDER
SOURCE SELECT
GLOBAL SCOPE
USER LEVEL
USER FADER AS-
SIGN
• LCR
fig.SELLCR.eps
"LCR" is shown as a choice of parameter in the following
popups. The two parameters LCR button and Centr are shown.
Screen/Popup
CH COPY
CH LIBRARY
GLOBAL SCOPE
USER LEVEL
• MAIN L/C/R
fig.SELMainLCR.eps
"MAIN L/C/R" is shown for the MONITOR screen's monitor
source select button. This indicates the stereo mix of MAIN L/R
and MAIN C.
LCR SYSTEM
Location added
Copy-destination channel select but-
ton
Insert-destination channel select but-
ton
Insert-destination channel select but-
ton
Insert-destination channel select but-
ton
Channel select button
Channel select button
Talkback output-destination select
button
Oscillator output-destination select
button
Monitor source select button
Input-source channel select button
Channel recall scope select button
Channel operation scope select button
Assign channel select button
Location added
Copy parameter select button
Recall parameter select button
Parameter recall scope button
Parameter operation scope button
139